Method

Action

Result

Remote Input12

a. Present the sensing condition.

b. Single-pulse the remote line.

T

•

Display flashes “2nd”

•

Arrow icon turns red

2. SET the sensing condition.

Method

Action

Result

Push Button

a. Present the sensing condition.

b. Double-click the Static button.

TEACH conditions accepted

•

Display flashes “Sn6l,” then

"Pt" twice

•

Sensor returns to RUN mode

with new settings

•

Arrow icon turns green

TEACH conditions not accepted

•

Display flashes “FAIL” and

returns to “1St”

•

Arrow icon remains red

•

After 60 seconds, the sensor

returns to RUN mode (the arrow

icon turns green) without

changing settings

Remote Input

Double-pulse the remote line.

T

T

T

Single-Point Light Set

•

Sets a threshold slightly below the taught condition.

•

Any condition darker than the threshold condition causes the

output to change state

•

Threshold position is adjustable using the “+” and “-” buttons

(see Manual Adjust on page 10)

•

Recommended for applications where only one condition is

known, for example a stable light background with varying

darker targets

A single sensing condition is presented, and the sensor positions a

threshold slightly below the presented condition. When a condition

darker than the threshold is sensed, the output either turns ON or OFF,

depending on the Light/Dark Operate setting (see Sensor Setup on

page 10).

Light SET and Light/Dark Operate Selection

Light Set teaches the Output OFF condition and forces the sensor into

Dark Operate (DO) mode. The sensor can be reconfigured to Light

Operate (LO) mode after the condition has been taught (see Sensor

Setup on page 10).

Threshold position

adjusted by

Manual Adjust

Sensor positions

threshold slightly below

the presented condition

Darkest

(no signal)

Most Light

(saturated

signal)

Output OFF

Output ON

Condition

Presented

Figure 7. Single-Point Light Set (Light Operate shown)

Mode

Threshold Offset (counts below taught signal value)

Super High-Speed

30

High-Speed

22

High-Power

9

12 0.04 seconds ≤ T ≤ 0.8 seconds

P/N 64154 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

7