Enterprise / Memory Line

PDS-PXE1-PXM1-C-001A

17

Ordering Information

Prototype Samples

For preliminary evaluation and engineering builds using Enterprise controllers, it is recommended that customers

order samples that have been pre-programmed at the factory with a generic configuration file. The devices with

generic file will not regulate by default. The customer can then program the parts to their specific system

requirements using software/hardware available from Infineon or through other controller programming facilities

(contact Infineon for recommendations). Infineon Field Application Engineers are available to assist with system and

configuration file optimization and programming of the controllers. Samples ordered with the generic configuration

option will have the shortest lead time. Alternatively, samples can be ordered with a customer specific custom

configuration pre-programmed at the factory, but lead times for these types of samples are significantly longer than

for generically configured samples. The generic part numbering format is shown below:

Figure 7. PXE1610CDN Prototype

Figure 8. PXE1110CDM Prototype

Figure 9. PXM1310CDM Prototype

P X E 1 6 1 0 C D N - G 0 0 3

Prefix

Part Number

5 characters

Version Control

Package Designator

Configuration Code

G: Generic

Temperature Range

D: -5°C to +85°C

N: 6mm x 6mm QFN

P X E 1 1 1 0 C D M - G 0 0 3

Prefix

Part Number

5 characters

Version Control

Package Designator

Configuration Code

G: Generic

Temperature Range

D: -5°C to +85°C

M: 5mm x 5mm QFN

P X M 1 3 1 0 C D M - G 0 0 3

Prefix

Part Number

5 characters

Version Control

Package Designator

Configuration Code

G: Generic

Temperature Range

D: -5°C to +85°C

M: 5mm x 5mm QFN