EV-RPG2-ECZ datasheet(15/21 Pages) AD

15 / 21 page

Data Sheet

ADIN2299

THEORY OF OPERATION

analog.com

Rev. 0 | 15 of 21

►

RREQ is only related to read operations. RREQ is not related

to write operations in any form. RREQ may go active (high)

anytime, including during a write operation.

See Figure 9 for a sample SPI transaction.

For the busy signal, there are some values that can be expected

regarding the timing of these signals (see Table 13).

The data detailed in Table 13 was gathered empirically and other

factors, such as the application processor code and environment,

can influence these numbers.

An example of a write transaction and a read transaction with

actual data is shown in Figure 10 and Figure 11, respectively.

The transaction is an NI_Discover message with the UI_EchoReq

and UI_EchoRes message, which is detailed in the code for the

ni-api-srv found in the NI-Example-App workspace in the Developer

Portal.

Figure 9. Sample SPI Transaction

Table 13. SPI Timing Requirements

Parameter

Minimum (μs)

Maximum (μs)

BUSY Activation Time, tBUSY_ACTIVATION

1.14

27.04

BUSY Active Time, tBUSY_ACTIVE

3.34

33.04

Wrap-Up Time, tWRAP_UP

4.48

36.16

Figure 10. General and Specific SPI Write Example

Figure 11. General and Specific SPI Read Example

EV-RPG2-ECZ Datenblatt(PDF) 15 Page - Analog Devices