EM78F651NAMSSLASHNAMJ datasheet(44/58 Pages) EMC

44 / 58 page

EM78F651N

8-Bit Microcontroller

•

Product Specification (V1.1) 10.20.2006

(This specification is subject to change without further notice)

Word 0

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

ENWDTB

OSC2

OSC1

OSC0

PR2

PR1

PR0

Bit 12: Not used, set to “0” at all time.

Bit 11 (NRHL): Noise rejection high/low pulse define bit. INT pin is falling edge

trigger.

1 : Pulses equal to 8/fc [s] is regarded as signal

0 : Pulses equal to 32/fc [s] is regarded as signal (default)

NOTE

The noise rejection function is turned off in the LXT2 and sleep mode.

Bit 10 (NRE): Noise rejection enable (depend on EM78F651N). INT pin is falling

edge trigger.

1 : disable noise rejection

0 : enable noise rejection (default) but in Low Crystal oscillator (LXT)

mode, the noise rejection circuit is always disabled

Bit 9 (CYES): Instruction cycle selection bit

1 : one instruction cycle (default)

0 : two instruction cycles

Bit 8~7 (CLKS1 and CLKS0): Instruction period option bit

Instruction Period

CLKS1

CLKS0

4 clocks

2 clocks

8 clocks

16 clocks

Refer to the section on Instruction Set.

Bit 6 (ENWDTB): Watchdog timer enable bit

1 : Enable

0 : Disable

Bits 5~3 (OSC2 ~ OSC0): Oscillator Mode Selection bits

EM78F651NAMS/NAMJ Datenblatt(PDF) 44 Page - ELAN Microelectronics Corp

EM78F651NAMS/NAMJ Datenblatt(HTML) 44 Page - ELAN Microelectronics Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Datenblatt Download

Link URL