PSD4235G2 datasheet(57/93 Pages) STMICROELECTRONICS

57 / 93 page

PSD4000 Series

Preliminary Information

The

PSD4000

Functional

Blocks

(cont.)

DATA OUT

REG.

ADDRESS

ALE

READ MUX

CONTROL REG.

DIR REG.

PLD INPUT (PORT F)

ISP OR BATTERY BACK-UP (PORT E)

DATA IN

OUTPUT

SELECT

OUTPUT

MUX

PORT PIN

DATA OUT

ADDRESS

A[ 7:0] OR A[15:8]

CONFIGURATION

BIT

Figure 23. Ports E, F and G Structure

9.4.8 Port F – Functionality and Structure

Port F can be configured to perform one or more of the following functions:

t MCU I/O Mode

t PLD Input – as direct input ot the PLD array.

t Address In – additional high address inputs. Direct input to the PLD array.

t Latched Address Out – Provide latched address out per Table 29.

t Slew Rate – pins can be set up for fast slew rate.

t Data Port – connected to D[7:0] when Port F is configured as Data Port for a

non-multiplexed bus.

t MCU Reset Mode – for 16-bit Motorola 683XX and HC16 microcontrollers.

9.4.9 Port G – Functionality and Structure

Port G can be configured to perform one or more of the following functions:

t MCU I/O Mode

t Latched Address Out – provide latched address out per Table 29.

t Open Drain – pins can be configured in Open Drain Mode

t Data Port – connected to D[15:8] when Port G is configured as Data Port for a

non-multiplexed bus.

t MCU Reset Mode – for 16-bit Motorola 683XX and HC16 microcontrollers

PSD4235G2 Datenblatt(PDF) 57 Page - STMicroelectronics

PSD4235G2 Datenblatt(HTML) 57 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93

Datenblatt Download

Link URL