| Datenblatt-Suchmaschine für elektronische Bauteile |
|
STW82102B Datenblatt(PDF) 30 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STW82102B Datenblatt(HTML) 30 Page - STMicroelectronics |
|
30 / 67 page ![]() General description STW82102B 30/67 Doc ID 018516 Rev 2 Table 11 and Table 12 give the current consumption and the phase noise at 1 MHz. 8.1.10 Output stage The differential output signal of the synthesizer after the Divider by 2 is available on pins 16 and 17. The output stage is selected by programming the PD[4:0] bits. The output stage is an open-collector structure which is able to meet different requirements over the desired output frequency range by proper connections on the PCB. See Figure 27: Diversity mode operation with same LO frequencies. 8.1.11 External VCO buffer Although the STW82102B includes two wideband and low-noise VCOs, external VCO use capability is also provided. The external VCO buffer can be used to manage a signal coming from an external VCO in order to build a local oscillator signal by using the STW82102B internal synthesizer as a PLL. This is only possible when External VCO standard mode or External VCO diversity master mode operation are selected. See Figure 29: External VCO standard mode operation and Figure 30: External VCO diversity mode operation with same LO. If the STW82102B is operated in Diversity slave mode, the external VCO buffer manage the signal coming from the synthesizer output stage of another STW82102B device See Figure 27: Diversity mode operation with same LO frequencies and Figure 30: External VCO diversity mode operation with same LO. The selection of the external VCO buffer is done by setting the PD[4:0] bits. The external VCO signal can range from 1500 MHz to 2200 MHz and its minimum power level must be -10 dBm. Table 11. VCOA performance against amplitude setting (frequency = 3.6 GHz) PLL_A[1:0] Current Consumption (mA) PN @ 1 MHz 00 23 -127 01 24 -128 10 32 -131 11 35 -132 Table 12. VCOB performance against amplitude setting (frequency = 4.3 GHz) PLL_A[1:0] Current Consumption (mA) PN @ 1 MHz 00 16 -124 01 18 -126 10 27 -128 11 30 -129 |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |