USB2533 datasheet(11/61 Pages) SMSC

11 / 61 page

USB 2.0 Hi-Speed 3-Port Hub Controller

Datasheet

SMSC USB2533

Revision 1.0 (06-17-13)

DATASHEET

3.1

Pin Descriptions

This section provides a detailed description of each pin. The signals are arranged in functional groups

according to their associated interface.

The “_N” symbol in the signal name indicates that the active, or asserted, state occurs when the signal

is at a low voltage level. For example, RESET_N indicates that the reset signal is active low. When

“_N” is not present after the signal name, the signal is asserted when at the high voltage level.

The terms assertion and negation are used exclusively. This is done to avoid confusion when working

with a mixture of “active low” and “active high” signals. The term assert, or assertion, indicates that a

signal is active, independent of whether that level is represented by a high or low voltage. The term

negate, or negation, indicates that a signal is inactive.

Note: The buffer type for each signal is indicated in the BUFFER TYPE column of Table 3.1. A

description of the buffer types is provided in Section 3.3.

Note: Compatibility with the SMSC UCS100x family of USB port power controllers requires the

UCS100x be connected on Port 1 of the USB2533. Additionally, both PRTPWR1 and OCS1_N

must be pulled high at Power-On Reset (POR).

Table 3.1 Pin Descriptions

NUM PINS

NAME

SYMBOL

BUFFER

TYPE

DESCRIPTION

USB/HSIC INTERFACES

Upstream

USB D+

(Flex Port 0)

FLEX_USBUP_DP

AIO

Upstream USB Port 0 D+ data signal.

Note:

The upstream Port 0 signals can be

optionally swapped with the

downstream Port 1 signals.

Upstream

USB D-

(Flex Port 0)

FLEX_USBUP_DM

AIO

Upstream USB Port 0 D- data signal.

Note:

The upstream Port 0 signals can be

optionally swapped with the

downstream Port 1 signals.

Downstream

USB D+

(Swap Port 1)

SWAP_USBDN1_DP

AIO

Downstream USB Port 1 D+ data signal.

Note:

The downstream Port 1 signals can be

optionally swapped with the upstream

Port 0 signals.

Port 1 D+

Disable

Configuration

Strap

PRT_DIS_P1

This strap is used in conjunction with

PRT_DIS_M1 to disable USB Port 1.

0 = Port 1 D+ Enabled

1 = Port 1 D+ Disabled

Note:

Both PRT_DIS_P1 and PRT_DIS_M1

must be tied to VDD33 at reset to

disable the associated port.

See Note 3.4 for more information on

configuration straps.

USB2533 Datenblatt(PDF) 11 Page - SMSC Corporation

USB2533 Datenblatt(HTML) 11 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

Datenblatt Download

Link URL