PRELIMINARY

This document contains information on a product under development at Advanced Micro Devices. The information

is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed

product without notice.

Publication# 20975

Rev: D Amendment/+1

Issue Date: May 1998

AmMC0XXA

2, 4, or 8 Megabyte 5.0 Volt-only Flash Miniature Card

DISTINCTIVE CHARACTERISTICS

s 2, 4, or 8 Mbytes of addressable Flash memory

s 5.0 Volt-only, single power supply operation

— Write and read voltage: 5.0 V

± 10%

s Fast access time

— 100 or 150 ns access time

s CMOS low power consumption

— Typical active read current:

70 mA (word mode)

— Typical active erase/write current:

100 mA (word mode)

— Typical standby current:

10

µA (8 Mbyte card)

s High write endurance

— Guaranteed minimum 100,000 write/erase

cycles per card

— More than 1,000,000 cycles per card typical

s Uniform sector architecture

— 64K byte individually useable sectors

— Erase Suspend/Resume increases system level

performance

— BUSY# and RESET# signals

s Zero data retention power

— No power required to retain data

s Available in industrial temperature grade

(–40

°C to +85°C)

s Miniature Card standard form factor

— True interchangeability

— 60-pad connector

— Supports multiple technologies

— Sonic welded stainless steel case

— PCMCIA Type II adapter available

— Selectable byte- or word-wide configuration

— Small form factor (38 mm x 33 mm x 3.5 mm)

s 60 connection bus

— 16-bit data bus

— 25-bit address bus

— Easy system integration

— Low cost implementation

— Low cost cards

s Consumer-friendly mechanicals

— User can easily insert and remove card, upgrade

memory, and add applications

s Voltage level keying

— Does not allow a 5 V card to plug into a 3 V

system and vice versa

— Single power supply design

— System does not need a separate program

voltage supply; only one is necessary to read

and write

GENERAL DESCRIPTION

The Miniature Card is an expansion card that provides

a high-performance, small form factor solution for data

and file storage to the portable, handheld market,

which includes audio, digital film, wireless, and PDA

(Portable Digital Assistant) applications. The Miniature

Card provides a low cost, low power, high performance

interface for memory cards.

Miniature cards can be easily “snapped” into the back

of an electronic system and can be readily removed

and replaced by end users. AMD’s 5 V Flash Miniature

Cards are manufactured using AMD’s industry leading

5.0 volt-only, single-power-supply Am29F080B and

Am29F017B Flash Memory devices, ensuring high reli-

ability and excellent performance. The Miniature Card

is less than 30% of the size of a PCMCIA memory card.

Applications include digital voice recorders, pocket

PCs and intelligent organizers, smart cellular tele-

phones, voice and data messaging pagers, digital still

cameras and portable instrumentation equipment.

The Miniature Card specification will be defined by

PCMCIA as of October 1997. The participating associ-

ation members include major Flash memory vendors

and leading consumer electronics OEMs. The goal of

the Miniature Card specification is to promote an open,

interoperable small-form-factor memory card standard.

For more information on the Miniature Card specifica-