USB3503 datasheet(46/73 Pages) MICROCHIP

46 / 73 page

USB3503

DS00001584B-page 46

 2011-2015 Microchip Technology Inc.

PwrOn2PwrGood

user

Time (in 2 ms intervals) from the time the power-on

sequence begins on a port until power is good on that

port. See Section 11.23.2.1 in the USB Specification.

The value contained in the ‘POWER_ON_TIME’ field is

directly reported to the host, and is determined by

Internal Default, or serial port load.

HubContrCurrent

user

Maximum current requirements of the Hub Controller

electronics in 1 mA increments. See Section 11.23.2.1 in

the USB Specification for additional details on the use of

this field.

This field reports the maximum current that only the hub

consumes from upstream VBUS when fully operational.

This value includes all support circuitry associated with

the hub (but does not include the current consumption of

any permanently attached peripherals if the hub is part of

a compound device).

The Hub supports Self-Powered and Bus-Powered

operation. The SELF_BUS_PWR bit (CONFIG_BYTE_1)

defined in Section 5.3.7, "Register 06h:

CONFIG_BYTE_1 - CFG1," on page 22 is used to

determine which of the stored values are reported. The

value reported to the host must coincide with the current

operating mode, and will be determined by the following

rules.

The value that is reported to the host will be:

‘HC_MAX_C_BP’ if SELF_BUS_PWR = ‘0’

‘HC_MAX_C_SP’ if SELF_BUS_PWR = ‘1’

‘HC_MAX_C_BP/SP’ are defined in Section 5.3.15, and

Section 5.3.16, "Register 0Fh: Hub Controller Max

Current For Bus Powered Operation - HCMCB," on

page 26. In all cases the reported value is sourced from

the Hub Controller Max Current data field (for Self or Bus

power) that was determined by Internal Default, or serial

port load.

DeviceRemovable

user

Indicates if port has a removable device attached. See

Section 11.23.2.1 in the USB Specification.

The value contained in the ‘NR_DEVICE’ field is directly

reported to the host, and is determined by Internal

Default, or serial port load.

PortPwrCtrlMask

FFh

Field for backwards USB 1.0 compatibility.

TABLE 7-11:

CLASS-SPECIFIC HUB DESCRIPTOR (CONTINUED)

Offset

Field

Size

Value

Description

USB3503 Datenblatt(PDF) 46 Page - Microchip Technology

USB3503 Datenblatt(HTML) 46 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Datenblatt Download

Link URL