| Datenblatt-Suchmaschine für elektronische Bauteile |
|
THS8083APZP Datenblatt(PDF) 22 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
THS8083APZP Datenblatt(HTML) 22 Page - Texas Instruments |
|
22 / 64 page ![]() 2–8 2.7 Output Formatter This block enables either a 4:4:4 24-bit output or a 4:4:4 48-bit output at half the pixel clock, or a 4:2:2 16-bit output useful for YUV digitizing (ITU.BT-601 style). In the latter case, an 8-bit port is used for the Y output while a second 8-bit port is used alternately for Cr or Cb. As per ITU BT-601, Cb is the first video data word for each line, as shown in Figure 2-7. The first color sample after an incoming HS is Cb. The output signal DHS is synchronized to the first pixel of a line and can therefore be used to uniquely identify Cb from Cr output data in down-sampled modes. Cb Cr Cb Cr Cb YY Y Y Y 2 Channels 3 Channels Cr (R-Y or V) Cb (or B-Y or U) Sampling Format Y X Y On Ch1 Bus A Output On Ch2 Bus A Output Other Outputs HI-Z Output Format t Output Formatter Combines Ob and Cr On Single Output Bus Figure 2–7. Output Formatter 2.8 Power Down Three power down modes are defined in the I2C power-down register, : • Chip power down: PWDN_ALL When PWDN_ALL=1, all analog circuits are powered down except the internal bandgap reference, the circuit that generates the clamping voltages and the sync reference voltage. All these are kept active for the composite sync slicer that remains active during power down. The clock frequency of the digital circuitry is lowered to reduce power consumption when in power down. • Internal reference power down: PWDN_REF When PWDN_REF=1, bottom and top references (VREFB, VREFT) on all channels become inputs and should be externally driven. • Bandgap reference power down: PWDN_BGAP When PWDN_BGAP=1, the internal bandgap reference voltage is inactive and terminal VMID should be externally driven. Additionally, the DTO circuitry can be disabled: • DTO power down: DTO_DIS When DTO_DIS=1, the DTO frequency is lowered to reduce power dissipation. This feature can be activated when an external sampling clock is used (EXT_ADCCLK). |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |