Product Specification

PE42510A

Page 7 of 7

Document No. 70-0266-03 │ www.psemi.com

©2008-2012 Peregrine Semiconductor Corp. All rights reserved.

Advance Information: The product is in a formative or design stage. The datasheet contains design target

specifications for product development. Specifications and features may change in any manner without notice.

Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later

date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best

possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to

change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer

Notification Form).

The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use

of this information. Use shall be entirely at the user’s own risk.

No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party.

Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant,

or in other applications intended to support or sustain life, or in any application in which the failure of the

Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no

liability for damages, including consequential or incidental damages, arising out of the use of its products in

such applications.

The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE

are trademarks of Peregrine Semiconductor Corp.

Sales Contact and Information

Table 7. Ordering Information

Order Code

Description

Package

Shipping Method

PE42510AMLI

Parts in Tubes or Cut Tape

Green 32-lead 5x5mm QFN

73 units/Tube

PE42510AMLI-X

Parts on Tape and Reel

Green 32-lead 5x5mm QFN

500 units/T&R

EK42510-01

Evaluation Kit

Evaluation Kit

1/Box

Figure 15. Tape and Reel Specs

Ao = 5.25 ± 0.1 mm

Bo = 5.25 ± 0.1 mm

Ko = 1.10 ± 0.1 mm

Notes: 1. 10 sprocket hole pitch cumulative

tolerance ± 0.2

2. Camber in compliance with EIA 481

3. Pocket position relative to sprocket hole

measured as true position of pocket, not

pocket hole

Device Orientation in Tape

Top of

Device

Pin 1

Tape Feed Direction