1 Features
RF performance and analog features
• High-performance, software-configurable transceiver with support for IEEE 802.15.4
• Wide RF frequency coverage from 118MHz to 1435MHz
• Supported modulation formats:
– SUN FSK, SUN O-QPSK, 2-(G)FSK, 4-(G) FSK, MSK, O-QPSK, and OOK
• High linearity PA:
– Up to +22dBm output power with FSK and OQPSK
• High efficiency PA:
– +16dBm output power in differential mode
– +14dBm output power in single-ended mode
– Supports FSK, O-QPSK, and OOK
• Receiver sensitivity (w/uLNA enabled):
– -131dBm at 0.75kbps O-QPSK 12ksps
– -122dBm at 6.25kbps SUN O-QPSK RM0
– -107dBm at 100kbps SUN FSK #2b, no FEC
• Current consumption:
– 6.9mA RX in SUN FSK, SUN O-QPSK
– TX (high linearity PA): 134mA at +22dBm
– TX (high efficiency PA): 33mA at +16dBm
Digital features
• Separate modems and dual IFfilters: O-QPSK, and FSK
• Dual modems enable dual receive capabilities
• Software configurable modem and in-field upgradable radio transceiver through a secure serial bootloader (SSBL)
• Includes IEEE and TI proprietary unique IDs
• Factory-calibrated TX power and RSSI measurement
• Sniff mode and dual sync word capabilities
• WaveMatch for improved sync detect performance
Easy-to-use software API
• Device configuration and information
• Action commands and status commands and data transfer commands
• Packet streaming and repeat RX/TX supported with stream store and flush commands
RoHS-compliant package
• 5mm × 5mm RKP VQFN
Peripherals
• 1 × SPI, 8 × GPIO, RF front-end control, AES 128-bit hardware accelerator