Datenblatt-Suchmaschine für elektronische Bauteile
  German  ▼
ALLDATASHEETDE.COM

X  

ADAU1977WBCPZ-R7 Datenblatt(PDF) 17 Page - Analog Devices

Teilenummer ADAU1977WBCPZ-R7
Bauteilbeschribung  Quad ADC with Diagnostics
PDF  68 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Hersteller  AD [Analog Devices]
Direct Link  http://www.analog.com
Logo AD - Analog Devices

ADAU1977WBCPZ-R7 Datenblatt(HTML) 17 Page - Analog Devices

Back Button ADAU1977WBCPZ-R7 Datasheet HTML 13Page - Analog Devices ADAU1977WBCPZ-R7 Datasheet HTML 14Page - Analog Devices ADAU1977WBCPZ-R7 Datasheet HTML 15Page - Analog Devices ADAU1977WBCPZ-R7 Datasheet HTML 16Page - Analog Devices ADAU1977WBCPZ-R7 Datasheet HTML 17Page - Analog Devices ADAU1977WBCPZ-R7 Datasheet HTML 18Page - Analog Devices ADAU1977WBCPZ-R7 Datasheet HTML 19Page - Analog Devices ADAU1977WBCPZ-R7 Datasheet HTML 20Page - Analog Devices ADAU1977WBCPZ-R7 Datasheet HTML 21Page - Analog Devices Next Button
Zoom Inzoom in Zoom Outzoom out
 17 / 68 page
background image
Data Sheet
ADAU1977
Rev. C | Page 17 of 68
DC-TO-DC BOOST CONVERTER
The boost converter generates a supply voltage for the
microphone bias circuit from a fixed 3.3 V supply. The boost
converter output voltage is programmable using Register 0x03.
The boost converter output voltage is approximately 1 V above
the set microphone bias voltage. The boost converter uses the
clock from the PLL, and the switching frequency is dependent
on the sample rate of the ADC. The FS_RATE bits (Bits[6:5] of
Register 0x02) must be set to the desired sample rate. The boost
converter switching frequency can be selected to be 1.5 MHz or
3 MHz using Bit 4 of Register 0x02. For the 1.5 MHz switching
frequency, the recommended value for the inductor is 4.7 µH,
whereas for the 3 MHz switching frequency, the recommended
value for the inductor is 2.2 µH.
Table 11 lists the typical switching frequency based on the
sample rates.
Capacitor Selection
The boost converter output is available at the VBOOST_OUT pin
(Pin 25) and must be decoupled to PGND using a 10 µF ceramic
capacitor to remove the ripple at the switching frequency. The
capacitor must have low ESR and good temperature stability.
The MLCC X7R/NPO dielectric type with 25 V is recommended.
Care must be taken to place this capacitor as close as possible to
the VBOOST_OUT pin (Pin 25).
Table 11. Typical Switching Frequency Based on the Sample Rates
Boost Converter Switching Frequency
Base Sample Rate (kHz)
Sample Rates (kHz)
Inductor = 2.2 µH
Inductor = 4.7 µH
32
8/16/32/64
(1024/12) × fS
(1024/22) × fS
44.1
11.025/22.05/44.1/88.2/176.4
(1024/16) × fS
(1024/30) × fS
48
12/24/48/96/192
(1024/16) × fS
(1024/32) × fS



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68


Datenblatt Download

Go To PDF Page


Link URL



War ALLDATASHEET hilfreich?  [ DONATE ] 

Über Alldatasheet   |   Werbung   |   Kontakt   |   Privatsphäre und Datenschutz   |   Link zum Datenblatt    |   Linktausch   |   Hersteller
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com