| Datenblatt-Suchmaschine für elektronische Bauteile |
|
VD6640 Datenblatt(PDF) 82 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
VD6640 Datenblatt(HTML) 82 Page - STMicroelectronics |
|
82 / 126 page ![]() Video system VG6640, VD6640 82/126 DocID023597 Rev 11 7.3.3 Digital gain To compensate for the relatively coarse analog gain steps and differences in integration times between the short, medium and long frames, the image sensor contains digital multipliers to increase the granularity of the gain system. The details of the digital gain implementation are listed below. • One set of white balance digital gain before the merge of the medium- and long integration frames • One set of digital gain multipliers at the output of the final merge of the short, medium, and long integration frames. Each set of digital gain multipliers consists of: • Four individual 16-bit digital channel gains (one per Bayer channel) – digital_gain_greenR – digital_gain_red – digital_gain_blue – digital_gain_greenB • The digital gain range for each channel is 0.000 to 255.9961 in steps of 0.0039 (1/256), i.e. 8 integer bits and 8 fractional bits – digital_gain_min = 0x0000 (0.000) – digital_gain_max = 0xFFFF (255.9961) Note: Text refers only to RGB 7.3.4 Pixel gain The imaging sensor has a feature whereby the readout pixels can be operated in two different conversion gain modes. In low-light conditions, a high conversion gain can be used to improve sensitivity. In high-light conditions, a low conversion gain is selected to improve signal SNR. The gain modes are set in the pixel_gain register (0x212c). Typically the highgain / lowgain ratio will be approximately 5.8 0x07 0111 5.0 dB (x1.8) 5.0 dB (x7.2) 0x08 1000 6.0 dB(x2.0) 6.0 dB(x8.0) 0x09 1001 7.2 dB (x2.3) 7.2 dB (x9.2) 0x0A 1010 8.5 dB (x2.7) 8.5 dB (x10.8) 0x0B 1011 10.1 dB (x3.2) 10.1 dB (x12.8) 0x0C 1100 12.0 dB (x4.0) 12.0 dB (x16.0) 0x0D 1011 14.5 dB (x5.3) 14.5 dB (x21.2) 0x0E 1110 18.0 dB (x8.0) 18.0 dB (x32.0) 0x0F 1111 24.0 dB (x16.0) 24.0 dB (x64.0) Table 37. Analog gain control (continued) Gain value Coarse gain code [A3:A0] Analog gain(L1) Analog gain(L4) |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |