| Datenblatt-Suchmaschine für elektronische Bauteile |
|
ADP5350ACBZ-1-R7 Datenblatt(PDF) 49 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP5350ACBZ-1-R7 Datenblatt(HTML) 49 Page - Analog Devices |
|
49 / 63 page ![]() Data Sheet ADP5350 Rev. B | Page 49 of 63 Bit No. Mnemonic Access Default Description 0 EN_BL R/W 0 The grouped backlight enable signal. 0 = disable the grouped backlight. 1 = enable the grouped backlight. Table 58. BST_CFG, Register Address 0x27 Bit Descriptions Bit No. Mnemonic Access Default Description 7 BST_MODE R/W 0 This bit sets the boost regulator operation mode. 0 = LED operation mode. 1 = boost standalone operation mode. 6 BST_BL R/W 0 This bit configures the boost regulator to provide the bias voltage to all active LED channels or only to the active LED backlight channels. (effective only when the boost regulator is configured in LED operation mode). 0 = set the boost regulator to provide the bias voltage for all active LED channels. In this configuration, the boost regulator provides the adaptive headroom regulation according to all active LED current sources. 1 = set the boost regulator to provide the bias voltage only to the active LED backlight channels. 5 FOVR R/W 0 This bit configures the override feature in the backlight fade in and fade out. 0 = the fade in and fade out override is disabled. 1 = the fade in and fade out override is enabled. 4 Not used R Not used. [3:2] BST_OVP R/W 00 This bit sets the overvoltage threshold in the boost output voltage in VOUT4 pin. 00 = 18.5 V. 01 = 15 V. 10 = 10 V. 11 = 5.6 V. 1 Not used R Not used. 0 BST_IPK R/W 0 This bit sets the peak current limit for boost regulator. 0 = 600 mA peak current limit. 1 = 300 mA peak current limit. Table 59. IBL_SET, Register Address 0x28 Bit Descriptions Bit No. Mnemonic Access Default Description [7:6] Not used R Not used. [5:0] IBL[5:0] R/W 000000 These bits set the LED current setting for the grouped backlight (LED1). All grouped backlight LED channels follow this current setting. A square law algorithm for 64 levels is used. 000000 = 0 mA. 000001 = 0.005 mA. 000010 = 0.020 mA. … 111101 = 18.750 mA. 111110 = 19.370 mA. 111111 = 20 mA. |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |