PCF8883

All information provided in this document is subject to legal disclaimers.

© NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet

Rev. 4.1 — 14 September 2016

10 of 35

NXP Semiconductors

PCF8883

Capacitive touch/proximity switch with auto-calibration

9.

Safety notes

10. Limiting values

[1]

Pass level; Human Body Model (HBM) according to Ref. 9 “JESD22-A114”.

[2]

Pass level; Machine Model (MM), according to Ref. 10 “JESD22-A115”.

[3]

Pass level; latch-up testing, according to Ref. 11 “JESD78” at maximum ambient temperature (Tamb(max)).

[4]

According to the store and transport requirements (see Ref. 14 “UM10569”) the devices have to be stored

at a temperature of +8

C to +45 C and a humidity of 25 % to 75 %.

CAUTION

This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling

electrostatic sensitive devices.

Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or

equivalent standards.

CAUTION

Semiconductors are light sensitive. Exposure to light sources can cause the IC to

malfunction. The IC must be protected against light. The protection must be applied to all

sides of the IC.

Table 5.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter

Conditions

Min

Max

Unit

VDD

supply voltage

0.5 +9

V

VI

input voltage

on pins IN, TYPE, CPC

0.5 V

DD(INTREGD) +0.5

V

IO

output current

on pin OUT

10 +50

mA

ISS

ground supply current

10 +50

mA

II

input current

on any other pin

10 +10

mA

Ptot

total power dissipation

-

100

mW

VESD

electrostatic discharge

voltage

HBM

[1] -

2500

V

MM

[2] -

200

V

Ilu

latch-up current

[3] -

100

mA

Tstg

storage temperature

[4]

60 +125

C

Tamb

ambient temperature

operating device

40 +85

C