32

µPD75P218

Debugging tools

Hardware

Software

IE-75001-R

EP-75216ACW-R

EP-75216AGF-R

EV-9200G-64

IE control program

The IE-75000-R is an in-circuit emulator available for the 75X series.

This emulator is used together with the emulation probe to develop

application systems of the

µPD75P218. For efficient debugging, the emula-

tor is connected to the host machine and PROM programmer.

The IE-75000-R-EM is an emulation board for the IE-75000-R and IE-75001-R.

The IE-75000-R contains the emulation board. The emulation board is used

together with the IE-75000-R or IE75001-R to evaluate the

µPD75P218.

The IE-75001-R is an in-circuit emulator available for the 75X series.

board and emulation probe to develop application systems of the

µPD75P218. For efficient debugging, the emulator is connected to the host

machine and PROM programmer.

Emulation probe for the

µPD75P218CW.

Connect this probe to the IE-75000-R or IE-75001-R for use.

Emulation probe for the

µPD75P218GF. Connect this probe to the

IE-75000-R or IE-75001-R for use.

A 64-pin conversion socket, the EV-9200G-64, attached to the probe

facilitates the connection of the probe with the user system.

This program enables the host machine to control the IE-75000-R or

IE-75001-R on the host machine through the RS-232-C interface.

Distribution media

3.5-inch 2HD

5-inch 2HD

5-inch 2HC

Part number

µS5A13IE75X

µS5A10IE75X

µS7B10IE75X

OS

MS-DOS

Ver. 3.10

to

Ver. 3.30C

PC DOS

(Ver. 3.1)

Host machine

PC-9800 series

IBM PC series

Notes 1. Provided only for maintenance purposes.

2. The IE-75000-R-EM is an option.

Remark NEC is not responsible for the operation of the IE control program and assembler unless it runs on

any host machine with the operation system listed above.