ECT25S40 datasheet(19/46 Pages) E-CMOS

19 / 46 page

E-CMOS Corp. (www.ecmos.com.tw)

Page 19 of 46

4L08N-Rev.F001

ECT25S40

4M BIT SPI NOR FLASH

Fast Read (0BH)

See Figure 11, the Read Data Bytes at Higher Speed (Fast Read) instruction is for quickly

Reading data out. It is followed by a 3-byte address (A23-A0) and a dummy byte, each bit

being latched-in during the rising edge of SCLK. Then the memory content, at that address, is

shifted out on SO, each bit being shifted out, at a Max frequency fc, during the falling edge of

SCLK. The first byte addressed can be at any location. The address is automatically

incremented to

the next higher address after each byte of data is shifted out.

Figure 11. Fast Read Sequence Diagram

Dual Output Fast Read (3BH)

See Figure 12, the Dual Output Fast Read instruction is followed by 3-byte address (A23-A0)

and a dummy byte, each bit being latched in during the rising edge of SCLK, then the memory

contents are shifted out 2-bit per clock cycle from SI and SO. The first byte addressed can be

at any location.

The address is automatically incremented to the next higher address after each byte of data

Is shifted out.

Figure 12. Dual Output Fast Read Sequence Diagram

ECT25S40 Datenblatt(PDF) 19 Page - E-CMOS Corporation