ATmega328P datasheet(39/448 Pages) ATMEL

39 / 448 page

8161D–AVR–10/09

ATmega48PA/88PA/168PA/328P

Power Management and Sleep Modes

Sleep modes enable the application to shut down unused modules in the MCU, thereby saving

power. The AVR provides various sleep modes allowing the user to tailor the power consump-

tion to the application’s requirements.

When enabled, the Brown-out Detector (BOD) actively monitors the power supply voltage during

the sleep periods. To further save power, it is possible to disable the BOD in some sleep modes.

See ”BOD Disable” on page 40 for more details.

9.1

Sleep Modes

F i g u r e

8- 1

o n

pa ge

presents

the

different

cloc k

systems

t h e

ATmega48PA/88PA/168PA/328P, and their distribution. The figure is helpful in selecting an

appropriate sleep mode. Table 9-1 shows the different sleep modes, their wake up sources BOD

disable ability.

Notes:

1. Only recommended with external crystal or resonator selected as clock source.

2. If Timer/Counter2 is running in asynchronous mode.

3. For INT1 and INT0, only level interrupt.

To enter any of the six sleep modes, the SE bit in SMCR must be written to logic one and a

SLEEP instruction must be executed. The SM2, SM1, and SM0 bits in the SMCR Register select

which sleep mode (Idle, ADC Noise Reduction, Power-down, Power-save, Standby, or Extended

Standby) will be activated by the SLEEP instruction. See Table 9-2 on page 44 for a summary.

If an enabled interrupt occurs while the MCU is in a sleep mode, the MCU wakes up. The MCU

is then halted for four cycles in addition to the start-up time, executes the interrupt routine, and

resumes execution from the instruction following SLEEP. The contents of the Register File and

SRAM are unaltered when the device wakes up from sleep. If a reset occurs during sleep mode,

the MCU wakes up and executes from the Reset Vector.

Table 9-1.

Active Clock Domains and Wake-up Sources in the Different Sleep Modes.

Active Clock Domains

Oscillators

Wake-up Sources

Sleep Mode

Idle

XXX

X(2)

XXX

ADC Noise

Reduction

X(2)

X(3)

XX(2)

Power-down

X(3)

Power-save

X(2)

X(3)

Standby(1)

XX(3)

Extended

Standby

X(2)

XX(2)

X(3)

ATmega328P Datenblatt(PDF) 39 Page - ATMEL Corporation

ATmega328P Datenblatt(HTML) 39 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datenblatt Download

Link URL