ADP5310

Data Sheet

Rev. A | Page 26 of 28

FACTORY PROGRAMMABLE OPTIONS

To order a device with options other than the default options, contact your local Analog Devices sales or distribution representative.

Table 9. Output Voltage Options for Channel 1 (Fixed Output Options: 1.2 V to 5.0 V)

Option

Description

Option 0

0.8 V adjustable output (default)

Option 1

1.2 V fixed output

Option 2

1.5 V fixed output

Option 3

1.8 V fixed output

Option 4

2.5 V fixed output

Option 5

2.85 V fixed output

Option 6

3.3 V fixed output

Option 7

5.0 V fixed output

Table 10. Output Voltage Options for Channel 2 (Fixed Output Options: 1.20 V to 3.60 V in 50 mV Increments, and 3.60 V to 5.00 V in

100 mV Increments)

Option

Description

Option 0

0.8 V adjustable output (note that the Channel 3 load switch is not usable in this configuration)

Option 1

1.20 V fixed output

Option 2

1.25 V fixed output

…

…

Option 35

2.90 V fixed output

Option 36

2.95 V fixed output

Option 37

3.00 V fixed output (default)

Option 38

3.05 V fixed output

…

…

Option 48

3.55 V fixed output

Option 49

3.60 V fixed output

Option 50

3.70 V fixed output

Option 51

3.80 V fixed output

…

…

Option 62

4.90 V fixed output

Option 63

5.00 V fixed output

Table 11. Switching Frequency

Option

Description

Option 0

1.2 MHz (default)

Option 1

600 kHz

Table 12. Operation Mode for Channel 1

Option

Description

Option 0

Forced PWM mode

Option 1

Automatic PWM/PSM mode (default)

Table 13. Output Discharge Functionality Options for Channel 1

Option

Description

Option 0

Output discharge function disabled for the buck regulator in Channel 1 (default)

Option 1

Output discharge function enabled for the buck regulator in Channel 1