LDTC-LAB datasheet(18/31 Pages) WAVELENGTH

Teilenummer	LDTC-LAB

Bauteilbeschribung	Laser Diode Driver & Temperature Controller — with IntelliTune®

PDF	31 Pages

Scroll/Zoom	100%

Hersteller	WAVELENGTH [Wavelength Electronics, Inc.]

Direct Link	https://www.teamwavelength.com/

Logo

18 / 31 page

The thermistor name includes the resistance at 25°C and the

bias current base selection. See the TCS Series datasheet

for the Resistance vs. Temperature charts and Steinhart-Hart

coefficients. The LDTC LAB auto-ranges the bias current by

default. The current level in the sensor name merely defines

the temperature range over which the sensor is calibrated.

To force a particular bias current, select it from the

Bias list.

Figure 27. Sensor Screen

DISPLAY SENSOR CALIBRATION

Press to display the calibration coefficients for

that sensor. User-defined sensor calibration

values can be edited remotely. Set up a custom

sensor using remote commands.

THERMISTOR:

Displays the Steinhart-Hart coefficients.

Figure 28. Thermistor Calibration Screen

RTD:

Displays the Standard Curve and the resistance at 0ºC.

Figure 29. RTD Calibration Screen

LINEAR VOLTAGE OR CURRENT

SENSOR:

Displays the slope and offset.

Figure 30. Linear Voltage Calibration Screen

Figure 31. Linear Current Calibration Screen

LDTC-LAB Datenblatt(PDF) 18 Page - Wavelength Electronics, Inc.