OPA607 datasheet(26/52 Pages) TI2

26 / 52 page

8.1.2 Selection of Feedback Resistors

The OPA810 is a classic voltage-feedback amplifier with each channel having two high-impedance inputs and

a low-impedance output. Standard application circuits (as shown in Figure 8-3 and Figure 8-4) include the

noninverting and inverting gain configurations. The dc operating point for each configuration is level-shifted by

the reference voltage VREF which is typically set to midsupply in single-supply operation. VREF is often connected

to ground in split-supply applications.

VIN

VREF

VSIG

VREF

(1+RF/RG)VSIG

VS+

VS-

Figure 8-3. Noninverting Amplifier

VIN

VREF

VSIG

VREF

-(RF/RG)VSIG

VS+

VS-

Figure 8-4. Inverting Amplifier

Equation 3 shows the closed-loop gain of an amplifier in noninverting configuration.

REF

(3)

Equation 4 shows the closed-loop gain of an amplifier in an inverting configuration.

REF

(4)

The magnitude of the low-frequency gain is determined by the ratio of the magnitudes of the feedback resistor

(RF) and the gain setting resistor RG. The order of magnitudes of the individual values of RF and RG offer a

trade-off between amplifier stability, power dissipated in the feedback resistor network, and total output noise.

The feedback network increases the loading on the amplifier output. Using large values of the feedback resistors

reduces the power dissipated at the amplifier output. Conversely, large feedback-resistor values increase the

inherent voltage and amplifier current noise contribution seen at the output while lowering the frequency at

which a pole occurs in the feedback factor (β). This pole causes a decrease in the phase margin at zero-gain

crossover frequency and potential instability. Using small feedback resistors increases power dissipation and

also degrades amplifier linearity due to a heavier amplifier output load. Figure 8-5 illustrates a representative

schematic of the OPA810 in an inverting configuration with the input capacitors shown.

OPA810

SBOS799E – AUGUST 2019 – REVISED AUGUST 2024

www.ti.com

Submit Document Feedback

Product Folder Links: OPA810

OPA607 Datenblatt(PDF) 26 Page - Texas Instruments

OPA607 Datenblatt(HTML) 26 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Datenblatt Download

Link URL