P83C266BDR datasheet(17/92 Pages) PHILIPS

17 / 92 page

1999 Mar 10

Philips Semiconductors

Product speciﬁcation

Microcontrollers for PAL/SECAM TV

with OSD and VST

P8xCx66 family

10 I2C-BUS SERIAL I/O

10.1

The I2C-bus

The serial port supports the two line I2C-bus. The I2C-bus

consists of a serial data line (SDA) and a serial clock line

(SCL). These lines can also function as I/O port lines

P1.6 and P1.5 respectively. To utilize this facility pins

P1.5/SCL and P1.6/SDA must be configured as alternative

functions instead of port lines; see Section 10.8.

The system is unique because data transport, clock

generation, address recognition and bus control arbitration

are all controlled by hardware.

Full details of the I2C-bus are given in the document

“The I2C-bus and how to use it”. This document may be

ordered using the code 9398 393 40011.

10.2

Operation modes

The I2C-bus serial I/O has complete autonomy in byte

handling and operates in four modes

• Master transmitter

• Master receiver

• Slave transmitter

• Slave receiver.

These functions are controlled by the S1CON register.

S1STA is the status register whose contents may also be

used as a vector to various service routines. S1DAT is the

data shift register and S1ADR the slave address register.

Slave address recognition is performed by hardware.

Fig.9 Block diagram of I2C-bus serial I/O.

handbook, full pagewidth

MBC749 - 1

SLAVE ADDRESS

S1ADR

SHIFT REGISTER

S1DAT

SDA

ARBITRATION LOGIC

SCL

BUS CLOCK GENERATOR

S1STA

7654

3210

S1CON

7654

3210

P83C266BDR Datenblatt(PDF) 17 Page - NXP Semiconductors

P83C266BDR Datenblatt(HTML) 17 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

Datenblatt Download

Link URL