MPC5644BCAMMJ1 datasheet(40/116 Pages) NXP

40 / 116 page

MPC5646C Microcontroller DataSheet, Rev. 7

Electrical Characteristics

NXP Semiconductors

NOTE

Stresses exceeding the recommended absolute maximum ratings may cause permanent

damage to the device. This is a stress rating only and functional operation of the device at

these or any other conditions above those indicated in the operational sections of this

specification are not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability. During overload conditions

(VIN > VDD_HV_A/HV_B or VIN <VSS_HV), the voltage on pins with respect to ground

(VSS_HV) must not exceed the recommended values.

VSS_ADC

SR Voltage on VSS_HV_ADC0,

VSS_HV_ADC1 (ADC

reference) pin with respect to

ground (VSS_HV)

—VSS_HV − 0.1

VSS_HV +0.1

VDD_HV_ADC0 SR Voltage on VDD_HV_ADC0

with respect to ground

(VSS_HV)

—–0.3

6.0

Relative to VDD_HV_A

VDD_HV_A − 0.3 VDD_HV_A+0.3

VDD_HV_ADC1

4 SR Voltage on VDD_HV_ADC1

with respect to ground

(VSS_HV)

—–0.3

6.0

Relative to VDD_HV_A

VDD_HV_A−0.3

VDD_HV_A+0.3

VIN

SR Voltage on any GPIO pin with

respect to ground (VSS_HV)

Relative to

VDD_HV_A/HV_B

−0.3

VDD_HV_A/HV_B

+0.3

IINJPAD

SR Injected input current on any

pin during overload condition

—

–10

IINJSUM

SR Absolute sum of all injected

input currents during overload

condition

—

–50

IAVGSEG

SR Sum of all the static I/O

current within a supply

segment

(VDD_HV_A or VDD_HV_B)

VDD = 5.0 V ± 10%,

PAD3V5V = 0

VDD = 3.3 V ± 10%,

PAD3V5V = 1

TSTORAGE

SR Storage temperature

—

–556

150

°C

1 V

DD_HV_B can be independently controlled from VDD_HV_A. These can ramp up or ramp down in any order. Design

is robust against any supply order.

2 This voltage is internally generated by the device and no external voltage should be supplied.

3 Both the relative and the fixed conditions must be met. For instance: If V

DD_HV_A is 5.9 V, VDD_HV_ADC0 maximum

value is 6.0 V then, despite the relative condition, the max value is VDD_HV_A +0.3 =6.2 V.

4 PA3, PA7, PA10, PA11 and PE12 ADC_1 channels are coming from V

DD_HV_B domain hence VDD_HV_ADC1 should

be within ±300 mV of VDD_HV_B when these channels are used for ADC_1.

5 Any temperature beyond 125 °C should limit the current to 50 mA (max).

6 This is the storage temperature for the flash memory.

Table 8. Absolute maximum ratings (continued)

Symbol

Parameter

Conditions

Value

Unit

Min

Max

MPC5644BCAMMJ1 Datenblatt(PDF) 40 Page - NXP Semiconductors

MPC5644BCAMMJ1 Datenblatt(HTML) 40 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datenblatt Download

Link URL