ATtiny45 datasheet(41/196 Pages) ATMEL

41 / 196 page

7598H–AVR–07/09

ATtiny25/45/85

ADC is used. To reduce power consumption in Power-down mode, the user can avoid the three

conditions above to ensure that the reference is turned off before entering Power-down mode.

8.9

Watchdog Timer

The Watchdog Timer is clocked from an On-chip Oscillator which runs at 128 kHz. By controlling

the Watchdog Timer prescaler, the Watchdog Reset interval can be adjusted as shown in Table

8-7 on page 43. The WDR – Watchdog Reset – instruction resets the Watchdog Timer. The

Watchdog Timer is also reset when it is disabled and when a Chip Reset occurs. Ten different

clock cycle periods can be selected to determine the reset period. If the reset period expires

without another Watchdog Reset, the ATtiny25/45/85 resets and executes from the Reset Vec-

tor. For timing details on the Watchdog Reset, refer to Table 8-7 on page 43.

The Wathdog Timer can also be configured to generate an interrupt instead of a reset. This can

be very helpful when using the Watchdog to wake-up from Power-down.

To prevent unintentional disabling of the Watchdog or unintentional change of time-out period,

two different safety levels are selected by the fuse WDTON as shown in Table 8-5. Refer to

“Timed Sequences for Changing the Configuration of the Watchdog Timer” on page 44 for

details.

Figure 8-7.

Watchdog Timer

Table 8-4.

Internal Voltage Reference Characteristics

Symbol

Parameter

Condition

Min

Typ

Max

Units

VBG

Bandgap reference voltage

VCC = 1.1V / 2.7V,

A = 25°C

1.0

1.1

1.2

tBG

Bandgap reference start-up time

VCC = 2.7V,

A = 25°C

µs

IBG

Bandgap reference current

consumption

CC = 2.7V,

TA = 25°C

µA

Table 8-5.

WDT Configuration as a Function of the Fuse Settings of WDTON

WDTON

Safety

Level

WDT Initial

State

How to Disable the

WDT

How to Change

Time-out

Unprogrammed

Disabled

Timed sequence

No limitations

Programmed

Enabled

Always enabled

Timed sequence

MCU RESET

WATCHDOG

PRESCALER

128 kHz

OSCILLATOR

WATCHDOG

RESET

WDP0

WDP1

WDP2

WDP3

WDE

ATtiny45 Datenblatt(PDF) 41 Page - ATMEL Corporation

ATtiny45 Datenblatt(HTML) 41 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datenblatt Download

Link URL