ATtiny45 datasheet(59/196 Pages) ATMEL

59 / 196 page

7598H–AVR–07/09

ATtiny25/45/85

11.1

MCU Control Register – MCUCR

The External Interrupt Control Register A contains control bits for interrupt sense control.

• Bits 1, 0 – ISC01, ISC00: Interrupt Sense Control 0 Bit 1 and Bit 0

The External Interrupt 0 is activated by the external pin INT0 if the SREG I-flag and the corre-

sponding interrupt mask are set. The level and edges on the external INT0 pin that activate the

interrupt are defined in Table 11-1. The value on the INT0 pin is sampled before detecting

edges. If edge or toggle interrupt is selected, pulses that last longer than one clock period will

generate an interrupt. Shorter pulses are not guaranteed to generate an interrupt. If low level

interrupt is selected, the low level must be held until the completion of the currently executing

instruction to generate an interrupt.

11.2

General Interrupt Mask Register – GIMSK

• Bits 7, 4..0 – Res: Reserved Bits

These bits are reserved bits in the ATtiny25/45/85 and will always read as zero.

• Bit 6 – INT0: External Interrupt Request 0 Enable

When the INT0 bit is set (one) and the I-bit in the Status Register (SREG) is set (one), the exter-

nal pin interrupt is enabled. The Interrupt Sense Control0 bits 1/0 (ISC01 and ISC00) in the MCU

Control Register (MCUCR) define whether the external interrupt is activated on rising and/or fall-

ing edge of the INT0 pin or level sensed. Activity on the pin will cause an interrupt request even

if INT0 is configured as an output. The corresponding interrupt of External Interrupt Request 0 is

executed from the INT0 Interrupt Vector.

• Bit 5 – PCIE: Pin Change Interrupt Enable

When the PCIE bit is set (one) and the I-bit in the Status Register (SREG) is set (one), pin

change interrupt is enabled. Any change on any enabled PCINT5..0 pin will cause an

interrupt. The corresponding interrupt of Pin Change Interrupt Request is executed from

the PCI Interrupt Vector. PCINT5..0 pins are enabled individually by the PCMSK0 Register.

Bit

765

4321

BODS

PUD

SM1

SM0

BODSE

ISC01

ISC00

MCUCR

Read/Write

R/W

Initial Value

000

0000

Table 11-1.

Interrupt 0 Sense Control

ISC01

ISC00

Description

The low level of INT0 generates an interrupt request.

Any logical change on INT0 generates an interrupt request.

The falling edge of INT0 generates an interrupt request.

The rising edge of INT0 generates an interrupt request.

Bit

543

–

INT0

PCIE

–

––

GIMSK

Read/Write

R/W

Initial Value

ATtiny45 Datenblatt(PDF) 59 Page - ATMEL Corporation

ATtiny45 Datenblatt(HTML) 59 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datenblatt Download

Link URL