| Datenblatt-Suchmaschine für elektronische Bauteile |
|
WM8948ECS/R Datenblatt(PDF) 92 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8948ECS/R Datenblatt(HTML) 92 Page - Wolfson Microelectronics plc |
|
92 / 189 page ![]() WM8948 Production Data w PD, May 2011, Rev 4.1 92 AUXADC READBACK Measured data from the AUXADC is read via the AuxADC Data Register (R60), which contains two fields. The AUXADC Data Source is indicated in the AUX_DATA_SRC field; the associated measurement data is contained in the AUX_DATA field. Reading from the AuxADC Data Register returns a 12-bit code which represents the most recent AUXADC measurement on the associated channel. It should be noted that every time an AUXADC measurement is written to the AuxADC Data Register, the previous data is overwritten - the host processor should ensure that data is read from this register before it is overwritten. The 12-bit AUX_DATA field can be equated to the actual voltage by scaling according to the applicable reference source. The full-scale value of AUX_DATA corresponds to the LDOVDD voltage level. The AUXADC interrupts can be used to indicate when new data is available - see “Interrupts”. A GPIO pin configured as “AUX_DONE” can also be used to indicate when new data is available - see “General Purpose Input / Output”. In a typical application, it is anticipated that the AUXADC Interrupt or GPIO flag would be used to control the AUXADC readback - the host processor should read the AUXADC Data Register in response to the AUXADC event. In Automatic AUXADC mode, the processor should complete this action before the next measurement occurs, in order to avoid losing any AUXADC samples. In Manual conversion mode, the interrupt signal provides confirmation that the commanded measurement has been completed. The control fields associated with AUXADC readback are defined in Table 59. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R60 (3Ch) Aux ADC Data 13:12 AUX_DATA_ SRC [1:0] 00 AUXADC Data Source 00 = No measurement 01 = AUX1 10 = AUX2 11 = SPKVDD 11:0 AUX_DATA [11:0] 000h AUXADC data (12 bit unsigned data) Table 59 AUXADC Readback |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |