SPRUG18 datasheet(135/214 Pages) TI

135 / 214 page

TMS320C6474

www.ti.com

SPRS552H

– OCTOBER 2008 – REVISED APRIL 2011

7.11 I2C Peripheral

The inter-integrated circuit (I2C) module provides an interface between a C64x+ DSP and other devices

compliant with Philips Semiconductors Inter-IC bus (I2C bus) specification version 2.1 and connected by

way of an I2C-bus. External components attached to this 2-wire serial bus can transmit/receive up to 8-bit

data to/from the DSP through the I2C module.

7.11.1 I2C Device-Specific Information

The C6474 device includes an I2C peripheral module (I2C). NOTE: when using the I2C module, ensure

there are external pullup resistors on the SDA and SCL pins.

The I2C modules on the C6474 may be used by the DSP to control local peripherals ICs (DACs, ADCs,

etc.) or may be used to communicate with other controllers in a system or to implement a user interface.

The I2C port supports:

•

Compatible with Philips I2C Specification Revision 2.1 (January 2000)

•

Fast Mode up to 400 Kbps (no fail-safe I/O buffers)

•

Noise Filter to remove noise 50 ns or less

•

7- and 10-Bit Device Addressing Modes

•

Multi-Master (Transmit/Receive) and Slave (Transmit/Receive) Functionality

•

Events: DMA, Interrupt, or Polling

•

Slew-Rate Limited Open-Drain Output Buffers

Figure 7-24 is a block diagram of the I2C module.

Peripheral Information and Electrical Specifications

135

Submit Documentation Feedback

Product Folder Link(s) :TMS320C6474

SPRUG18 Datenblatt(PDF) 135 Page - Texas Instruments