ST7285C datasheet(81/117 Pages) STMICROELECTRONICS

81 / 117 page

81/117

ST7285C

ST7 ADDRESSING MODES(Cont’d)

Indexed (no offset, short, long)

The required data byte to do the operation is found

by its memory address, which is defined by the un-

signed addition of an index register (X or Y) with

an offset which follows the op-code.

The indirect addressing mode consists of three

sub-modes:

Indexed (no offset):

There is no offset, (no extra byte after the op-

code), but only allows 00 - FF addressing space.

Indexed (short):

The offset is a byte, thus require only one byte af-

ter the op-code, but only allow 00 - 1FE address-

ing space.

Indexed (long):

The offset is a word, thus allowing 64Kb address-

ing space, but requires 2 bytes after the op-code.

Indirect (short, long):

The required data byte to do the operation is found

by its memory address, located in memory (point-

er).

The pointer address follows the op-code. The indi-

rect addressing mode consists of two sub-modes:

Indirect (short):

The pointer address is a byte, the pointer size is a

byte, thus allowing 00 - FF addressing space, and

requires 1 byte after the op-code.

Indirect (long):

The pointer address is a byte, the pointer size is a

word, thus allowing 64Kb addressing space, and

requires 1 byte after the op-code.

No Offset, Long and

Short Indexed Instruc.

Function

Load

Compare

AND, OR, XOR

Logical Operations

ADC, ADD, SUB, SBC

Arithmetic Additions/Sub-

stractions operations

BCP

Bit Compare

No Offset and Short

Indexed Inst. Only

Function

CLR

Clear

INC, DEC

Increment/Decrement

TNZ

Test Negative or Zero

CPL, NEG

1 or 2 Complement

BSET, BRES

Bit Operations

BTJT, BTJF

Bit Test and Jump Operations

SLL, SRL, SRA, RLC,

RRC

Shift and Rotate Operations

SWAP

Swap Nibbles

CALL, JP

Call or Jump subroutine

Available Long and Short

Indir ect Instructions

Function

Load

Compare

AND, OR, XOR

Logical Operations

ADC, ADD, SUB, SBC

Arithmetic Additions/Sub-

stractions operations

BCP

Bit Compare

Short Indirect

Instructions Only

Fun ction

CLR

Clear

INC, DEC

Increment/Decrement

TNZ

Test Negative or Zero

CPL, NEG

1 or 2 Complement

BSET, BRES

Bit Operations

BTJT, BTJF

Bit Test and Jump Operations

SLL, SRL, SRA,

RLC, RRC

Shift and Rotate Operations

SWAP

Swap Nibbles

CALL, JP

Call or Jump subroutine

ST7285C Datenblatt(PDF) 81 Page - STMicroelectronics

ST7285C Datenblatt(HTML) 81 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datenblatt Download

Link URL