| Datenblatt-Suchmaschine für elektronische Bauteile |
|
ST7285C Datenblatt(PDF) 27 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7285C Datenblatt(HTML) 27 Page - STMicroelectronics |
|
27 / 117 page ![]() 27/117 ST7285C I/O PORTS (Cont’d) 4.1.3 I/O Port Implementation On the ST7285C, the pull down is always absent, the pull up exists only where an interrupt facility is present (Ports C4, C5, D4, D5, F0, F1, F2, F3, G3). On port A, the analog inputs are directly con- trolled by the ADC.The I/O port register configura- tions are reduced to the following. 4.1.3.1 Ports A0-A7, B0-B7, C0-C3, C6, C7, D0- D3, D6, D7,E0-E7, F4-F7, G0-G2, G4-G7, H0-H5 These ports do not offer interrupt capabilities. Note: Open drain I/O is implemented on I2C pins (pins 19 and 20) and high voltage pins (PH3/4/5). The design uses special I/O devices without P channel, thus forbidding the push pull configura- tion. In this case there is neither pull up register nor op- tion register. These registers do not exist and so cannot be read or written to. 4.1.3.2 Ports C4, C5, D4, D5, F0-F3, G3 These ports offer interrupt capabilities. In this case there is no pull up register since the pull-up is present only when the interrupt feature is selected. This register does not exist and so can- not be read or written to. Switching these I/O ports from one state to anoth- er should be done in such a sequence as to pre- vent unwanted side effects. Recommended safe transitions are illustrated in Figure 14. Other tran- sitions are potentially risky and should be avoided, since they are likely to present unwanted side-ef- fects such as spurious interrupt generation. Figure 14. Recommended I/O State Transition Diagram DDR MODE OPTION 0 input no pull-up, no pull-down, no interrupt 1 output push-pull (or open drain: see note) DDR OR MOD E OPTION 0 0 input no pull-up, no pull-down, no interrupt 0 1 input interrupt, pull-up 1 0 output open-drain, no pull-up 1 1 output push-pull, no pull-up, no pull-down 11 00 01 Interrupt pull-up push-pull no pull-up open-drain no pull-up no pull-down INPUT OUTPUT OUTPUT 10 no pull-up no interrupt INPUT no pull-down (Reset state) XX = DDR, OR |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |